Teaming Mechanisms - Dell Broadcom NetXtreme Family of Adapters User Manual

Teaming Mechanisms

Architecture
Types of Teams
Driver Support by Operating System
Supported Teaming Speeds
Architecture
The Broadcom Advanced Server Program is implemented as an NDIS intermediate driver (see
protocol stacks such as TCP/IP and IPX and appears as a virtual adapter. This virtual adapter inherits the MAC Address of the
first port initialized in the team. A Layer 3 address must also be configured for the virtual adapter. The primary function of
BASP is to balance inbound (for SLB) and outbound traffic (for all teaming modes) among the physical adapters installed on
the system selected for teaming. The inbound and outbound algorithms are independent and orthogonal to each other. The
outbound traffic for a particular session can be assigned to a given port while its corresponding inbound traffic can be
Figure 2). It operates below