Dell Broadcom NetXtreme Family of Adapters User Manual page 168

management interface.
Unable to create symbolic link
3
for the management interface.
Broadcom Advanced Server
4
Program Driver has started.
Broadcom Advanced Server
5
Program Driver has stopped.
Could not allocate memory for
6
internal data structures.
7 Could not bind to adapter.
8 Successfully bind to adapter.
9 Network adapter is disconnected.
10 Network adapter is connected.
Broadcom Advanced Program
Features Driver is not designed
11
to run on this version of
Operating System.
Hot-standby adapter is selected
as the primary adapter for a
12
team without a load balancing
adapter.
Network adapter does not
13
support Advanced Failover.
Network adapter is enabled via
14
management interface.
Network adapter is disabled via
15
management interface.
Network adapter is activated and
16
is participating in network traffic.
Network adapter is de-activated
17 and is no longer participating in
network traffic.
Please read all Restrictions and
Back to Contents Page
device instance.
Another driver has created a
conflicting device name.
Another driver has created a
conflicting device name.
The driver has stopped.
The driver cannot allocate
memory from the operating
system.
The driver could not open
one of the team physical
adapters.
The driver successfully
opened the physical
adapter.
The physical adapter is not
connected to the network (it
has not established link).
The physical adapter is
connected to the network (it
has established link).
The driver does not support
the operating system on
which it is installed.
A standby adapter has been
activated.
The physical adapter does
not support the Broadcom
NIC Extension (NICE).
The driver has successfully
enabled a physical adapter
through the management
interface.
The driver has successfully
disabled a physical adapter
through the management
interface.
A physical adapter has been
added to or activated in a
team.
The driver does not
recognize the installed
adapter.
Disclaimers.
Unload the conflicting device driver that uses the
name Blf.
Informational message only. No action is
required.
Informational message only. No action is
required.
Close running applications to free memory
Unload and reload the physical adapter driver,
install an updated physical adapter driver, or
replace the physical adapter.
Informational message only. No action is
required.
Check that the network cable is connected, verify
that the network cable is the right type, and
verify that the link partner (switch or hub) is
working correctly.
Informational message only. No action is
required.
Consult the driver release notes and install the
driver on a supported operating system or update
the driver.
Replace the failed physical adapter.
Replace the adapter with one that does support
NICE.
Informational message only. No action is
required.
Informational message only. No action is
required.
Informational message only. No action is
required.
Informational message only. No action is
required.