Dell Broadcom NetXtreme Family of Adapters User Manual page 100

6. Select the type of team you want to create. If the team type is an SLB type team, click Next. If the team type is not an SLB type team, then a
dialog box appears. Verify that the network switch connected to the team members is configured correctly for the team type, click OK, and continue.
NOTE: NetXtreme II network adapters with iSCSI enabled is supported only in an SLB team type. To continue with the creation of non-SLB team
types, first disable iSCSI by deselecting iSCSI Offload Engine from the Resource Reservations area of the Configurations tab.
7. From the Available Adapters list, click the adapter you want to add to the team and then click Add. Remove team members from the Team
Members list by clicking the adapter and then clicking Remove. Click Next.
NOTE: There must be at least one Broadcom network adapter assigned to the team.
NOTE: A team created with a single adapter will not have load balancing or failover capabilities.
The TCP Offload Engine (TOE), Large Send Offload (LSO) and Checksum Offload (CO) columns indicate if the TOE, LSO, Jumbo MTU, and/or the
CO properties are supported for the adapter. The TOE, LSO, Jumbo MTU, and CO properties are enabled for a team only when all of the members
support and are configured for the feature. If this is the case, then the team offload capabilities appear on the bottom of the screen.