Dell Broadcom NetXtreme Family of Adapters User Manual page 171

Broadcom netxtreme 57xx user guide
Hide thumbs Also See for Broadcom NetXtreme Family of Adapters:
Table of Contents

Advertisement

1. Bind BASP.LAN to the adapters on the team by using a custom BASP BIND command at the console.
Example:
BASP BIND BASP_1_EII B57_1_EII
BASP BIND BASP_1_EII B57_2_EII
NOTE: If there are multiple frame types loaded on the virtual and the physical adapters, it is necessary to bind only
one frame type on the virtual adapter to the same frame type on the physical adapter. The other frame types are
automatically bound.
2. Bind protocols to BASP.LAN.
Example:
BIND IP BASP_1_EII ADDR=x.x.x.x MASK=x.x.x.x
NOTE: The recommended sequence is to load BASP.LAN before the network drivers as outlined above. This allows
BASP.LAN to determine the initial link state of the bound adapters without delay.
Unloading BASP
To unload Broadcom Advanced Server Program, unload the adapter driver and the BASP drivers.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadcom netxtreme 57xx series

Table of Contents