Using Silent Installation - Dell Broadcom NetXtreme Family of Adapters User Manual

Run the installer
Install the Microsoft iSCSI Software Initiator along with the patch (MS KB939875)
NOTE: If performing an upgrade of the device drivers from the installer, re-enable iSCSI Crash Dump from the
Advanced section of the BACS Configuration tab.
Perform this procedure after running the installer to install the device drivers and the management applications.
1. Install Microsoft iSCSI Software Initiator (version 2.06 or later) if not included in your OS. To determine when you need
to install the Microsoft iSCSI Software Initiator, see
go to http://www.microsoft.com/downloads/details.aspx?familyid=12cb3c1a-15d6-4585-b385-
befd1319f825&displaylang=en.
2. Install Microsoft patch for iSCSI crash dump file generation (Microsoft KB939875) from
http://support.microsoft.com/kb/939875.
Table 2: Windows Operating Systems and iSCSI Crash Dump
Operating System
NDIS
Windows Server 2003
Windows Server 2008
Windows Server 2008 R2 Yes (included in OS)
OIS
Windows Server 2003
Windows Server 2008
Windows Server 2008 R2 No

Using Silent Installation

NOTES:
All commands are case sensitive.
For detailed instructions and information about unattended installs, refer to the Silent.txt file in the
Driver_Management_Apps_Installer folder.
To perform a silent install from within the installer source folder
Type the following:
setup /s /v/qn
To perform a silent upgrade from within the installer source folder
Type the following:
setup /s /v/qn
To perform a silent reinstall of the same installer
Type the following:
setup /s /v"/qn REINSTALL=ALL"
NOTE: The REINSTALL switch should only be used if the same installer is already installed on the system. If upgrading an
earlier version of the installer, use setup /s /v/qn as listed above.
To perform a silent install by feature
Use the ADDSOURCE to include any of the features listed below.
Type the following according to platform:
IA32 platforms: setup /s /v"/qn ADDSOURCE=Driversi32,BACSi32,BASPi32,SNMPi32,CIMi32"
To determine if you need to install the Microsoft patch, see
MS iSCSI Software Initiator Required Microsoft Patch (MS KB939875) Required
Yes (download from Microsoft)
Yes (included in OS)
No
No
Table 2. To download the iSCSI Software Initiator from Microsoft,
Yes
No
No
Yes
No
No
Table 2.