ProScan PS35682 Owner's Manual page 9

Make sure auto-help displays are turned on.
Your TV has a complete menu system that allows you to
-form most functions using only the simplified remote.
,, henever one of the menus appears on the TV screen,
auto-help displays appear on the bottom of the screen if the
Auto Help: on/off function is set to on.
If the auto-help displays do not automatically appear on
your TV screen, the following instructions explain how to
turn them on.
Press MENU buttonto
display MAIN MENU.
Help displays automatically
appear onscreen.
AutoProgramthe TV'schannel memory scan list.
The channel memory scan list is the list of TV channel
numbers your TV will stop on when you press the CHANNEL
up or down button. You can program any list of c]aannels
into the channel memory.
MENU Buttonand
+ and- Buttons
To start the TV autoprogramming itself:
1 Press MENUto display
the
MAIN MENU.
2 Repeatedly press - or +
to highlight Setup in
white.
3 Press MENUagain to
display the SETUP
menu.
o turn an auto-help displays:
1 Press MENUto display
the MAINMENU.
Repeatedly press - or +
to highlight Setup in
white.
3 Press MENUagain to
display the SETUP
menu.
4 Repeatedly press
- or + to highlight the
Auto help: on/off
function in white.
5 Press MENUagain to
turn the Auto help:
on/off function to on.
Note: The menus will automatically disappear from the screen
after a few seconds if no button is pressed. To quickly remove
them, press the CLEARbutton on the master remote or press the
-- or + button to highlight the Done function and then press MENU.
Repeatedly press - or + to highlight the Autoprooram
function in white. Then press MENUto start the TV
AutoProgramming. Details are on page 46.
1 Repeatedly press - or + to
highlight Autoprogram in
white.
2
Press
MENU to
start
AutoProgramming.
Notes: The Active Channels display will appear on the TV
screen.
The TV will automatically program all channels for ANT A input
and then ANT B input (even if you only have one antenna input
connected).
(contmuedon n extpage)
5