ProScan PS35682 Owner's Manual page 61

After the
AUDIO
button is programmed, the buttons described
bellow will operate the basic functions of most audio
equipment. Depending on the age, brand, model, and type of
audio equipment, some models may not be able to respond to
all the function buttons listed. You will want to experiment
with each button to determine the exact function for your
component.
@
@
@
@
@
@
AUDIOButton: Press to put remote in "Audio Mode" so
other buttons will control the audio component. Some
components will turn on automatically when you press
the aUOtO button. Press the iv button to put remote back
into "TV Mode".
CHANNELButtons: Press to select the next higher or
lower channel in the component's channel memory.
VOLUME Buttons: Press to change volume level.
MUTEButton: Press to quickly reduce sound to its
minimum level. Press MUTE again or VOLUME up to
restore the sound.
ID Button: Press when programming remote to control
audio equipment.
STOP Button: Press to stop whatever the component is
doing: playing, recording, rewinding, etc.
RECORD Button: Press to start recording.
®
(9
®
@
@
@
@
FF(Fast Forward)Button: Press while component is
stopped to fast forward tape.
REWIND Button: Press while component
is stopped to
rewind tape.
PAUSE Button:Press to pause play or record. To release
pause, press again.
PLAYButton: Press to start component
playing.
ANT(Antenna) Button:Performs various functions
depending on the type of equipment. Experiment with
this button.
NumberButtons: Press two numbers
to directly select a
channel.
OFF/ON Button:Press to turn on component. Press again
to turn off. Some components will turn on automatically
when you press the AUDIO button.
57