ProScan PS35682 Owner's Manual page 7

The steps b elow will help yougetyour T Vconnected and
working q uickly.The page numbers onwhich youcan find
detailed instructions foreach ofthese steps a realso listed for
you]: convenience.
1 Unpack TV and accessories.
The accessories that came packed with your TV include two
remote controls, six AAA batteries, and one antenna adapter.
I ii
2 Connect an antenna or cable-TV system.
Most antenna or cable-TV systems can be connected as
shown here.
Number
Turn on the TV, select a channel, and adjustthe volume.
1 Plug the TV's power cord into a wall outlet or suitable
power strip outlet.
_ower cord into
2 To turn on the TV, press the TVbutton on the master
remote or press the POWERbutton on the simplified remote.
When using either one of the remotes, remember to point
it at the front of the TV.
POWERButton
>VOLUME
iii:il;i!!iii_ili_i!i
])] ]][]]][]]]]]]_]] ] ]]][] ] ]]
]
AHTA
.... O
Incomin6 Cable ANT B
from Antonna or
Clible-TV System @
@
CONVERTER
• Details for connecting a home antenna to your TV are
on page 61.
• Details for connecting a cable-TV system to your TV
are on pages 62-63.
• Details for connecting a VCR to your TV are on
pages 66-67.
• Details for connecting a laser disc player to your TV
are on page 68.
Press the
VOLUME
up or down button to adjust the volume
to a desired level.
Press the
CHANNEL
up or down button to select the next
channel in memory. You can also press two number
buttons to select a channel. Some channels were
programmed into the channel memory at the factory, so
pressing CHANNEL u p or down stops at only these channels.
When you start the autoprogramming feature described on
page 5, your set will automatically scan through all
channels and place the active channels for your area into
its channel memory.
Install the batteries in remote controls.
Details are on page 8.
* Appearance and design of optional stand may vary in Canada.
(continuedon next page)