ProScan PS35682 Owner's Manual page 41

1 Press MENU to display
the MAIN MENU.
2 Repeatedly press+ or-
to highlight the Video
Adjustfunction.
3 Press MENU to display
VIDEOADJUST menu.
4 Press the + or- buttonto
highlight the functionyou want
to adjust, then press MENU to
enter the adjustmentdisplay.
Press + or-to adjust it. Press
MENU to return to the VIDEO
ADJUST menu.
Pressing the - button moves the highlight down the TV
screen (one item per press).
Pressing the + button moves the highlight up the TV screen
(one item per press).
Pressing the MENU button when a function is highlighted
allows you to enter or adjust that function.
After a few seconds, the VIDEO ADJUST menu will disappear
fi'om the screen if no button is pressed. To exit the menu
quickly, highlight
Done
and then press MENU (or press the
CLEAR button on the master remote control).
Coloradjusts the amount of color in the picture. Press + to
increase color or press - to decrease color.
Tint adjusts the color of flesh tones. Press + to add more red tint
or press - to add more green tint.
Contrast adjusts the overall brightness
and contrast of the picture.
Press + to increase contrast or press - to decrease contrast.
The Color temp (temperature): cool/med/warm fimction lets you
adjust the blue and red hues of the overall picture to your
personal preference. Press + or -to change.
The Noise reduce: Iow/med/high function allows you to remove
some of the picture noise caused by a weak signal. You can
select how much noise reduction you need (low, medium, or
high). Try each one and select the one that gives you the cleanest
and clearest picture.
Highlight Done and press MENU to exit the VIDEO ADJUST menu.
Adjustingfor a ColorPicture that Pleases You
1 Decrease color to minimum. This will leave a black-and-white
image on the screen.
2 Adjust contrast until the picture pleases you.
3 Adjust brightness until the black parts of the picture appear
black. You may need to wait until the picture shows
something you are sure is black. Be careful not to lose the
details in darkly shaded areas.
4 Increase color until you reach a pleasing level of intensity.
5 Adjust tint until flesh tones or other color objects appear
natural.
6 Adjust sharpness for a pleasing level of picture sharpness.
(For weak signals, the picture may be more pleasing with
sharpness decreased.)
7 Set the Auto color, Color temp, and Noise reduce features to
your personal preference.
Brightness adjusts the brightness
of the dark portions of the
piicture. Press + to increase brightness or press - to decrease
brightness.
Sharpness adjusts picture sharpness. Press + to increase
sharpness or press - to decrease sharpness.
The Auto color: on/off function allows you to select either Auto
color: on or Auto color: off. When Auto color: on is selected, the
TV will minimize the differences in color and fleshtones that
normally occur due to program variations. Press + or - to select
either Auto color: on or Auto color: off.
Saving, Restoring, and Returningto Factory Video Settings
The TV will remember your settings-even when you turn
it off. To prevent losing your personal settings because
someone changes them accidentally, you can save them
using the MEMORY M ENU. The ._ettings for color, tint,
contrast, brightness, and sharpness will be saved. After the
settings have been saved, you can restore them at a later
date by using the MEMORY M ENU. The MEMORY MENU also lets
you easily restore the video functions to their factory
settings. Details are on page 38.
37