ProScan PS35682 Owner's Manual page 15

(_) DISPLAY Button displays time (if clock has been set) and
channel number on the TV screen.
(_ CLEARButton
Pressing
CLEAR
quickly clears the screen of all on-screen
display messages (except Mute). It is also used to cancel the
commercial skip count-down clock.
(_ SURR (Surround) lets you between eight
Button
switch the
audio modes
(STEREO, EXPANDED STEREO, DOLBY 3 STEREO,
PROLOGIC, PHANTOM PROLOGIC, MATRIX SURROUND, HALL
SURROUND, or STADIUM SURROUND).
Details
are on
pages 22-36.
(_ Arrow Buttonslet
the when it is
you pan
across
picture
zoomed in. Details are on pages 14-15. They also let you
move the small picture around the screen during PIP
(Picture-In-Picture) operation. Details are on pages 18-19.
_1
FRZ(Freeze) Button lets
freeze the When
you picture. using
the PIP (Picture-In-Picture) function, the FRZbutton only
freezes the small inset picture. Details are on
pages 14 and 19.
1_) CHAN (Channel) GUIDE Button lets you display 12 channels
at the same time. Details are on page 17.
_) ZOOM and OUT Buttons let make the and
you
picture larger
smaller. Details are on pages 14-15. These buttons also let
you change the size of the small picture during PIP (Picture-
In-Picture) operation. Details are on pages 18-19.
_) PIP(Picture-In-Picture) C ontrol B uttons (PIP,OFF,and
SWAP)are used to display two pictures on the TV screen at
once. The little picture can be switched with the big picture.
Details are on pages 18-19.
_1) (Antenna) Button
ANT
Because your TV has two different antenna inputs on the
back (labeled ANTA and ANTB) yOUcan connect more than
one antenna or signal source. Press the
ANT
button to switch
from one input to the other.
Antenna B appears with the channel number in the channel
number display when you are watching whatever is
connected to the ANTBinput. Details are on page 41.
®
®
®
®
MENU Button and - and + Buttons
Press MENU
once to display the MAINMENU,then press + or
- to highlight the function you want. Next press MENU
again to enter or adjust that function or display the next
menu. Details about using each function begin on page 13.
INPUT Button lets you quickly view signals from the INPUT
jacks. Pressing this button switches the TV from its current
channel directly to channel 91, and then to channel 92.
Channel 91 lets you view the signal from a component
connected to the INPUT1jacks and channel 92 accesses the
INPUT
2 jacks. Press the CHANNEL up or down button to
return to normal channels.
CS (Commercial Skip) Button
Use this button when you want to scan other channels
during a commercial break. When a program break occurs,
press cs once before changing channels. The TV will
count down 30 seconds on the screen and then ii';i ii:i!i'i:_i
automatically switch back to the original channel you were :
watching.
Press cs twice if you want the TV to count down 60
seconds. Each additional press will add another 30 seconds _,_,_,_
to the count-down time (up to four minutes) and then each _'_?ii
_ _
additional press will add another 60 seconds to the
countdown time (up to 60 minutes).
To cancel, press CLEAR.The countdown clock will
disappear from the screen, and the TV will stay tuned to the
channel it was on when you pressed CLEAR.
Number Buttons let you select channels directly i?tstead of
using the
CHANNEL
buttons. Always press two number
buttons (first one, then the other) to select a channel. For
example, press 0 then 6 for channel 6.
To select a 3-digit cable channel (like 127), press and hold
number button 1 until 1-- appears, and then press two
more number buttons. Your TV will tune up to channel
number 128 when the Cable/Air function is set to Cable.
Check with your cable company to determine which
channels are available in your area.
(_ 0FF/0N on master remote turns the TV off. The
Button the
POWER button on the simplified remote turns the TV off
and on.
11