ProScan PS35682 Owner's Manual page 37

• Press MENUwhen Volume is highlighted to enter the
VOLUMEadjustment display. Press + to increase or - to
decrease the TV's volume. This volume control raises and
lowers the volume of the internal, external, and surround
speakers.
Note: If the VOLUME d isplay stops before it is at full volume and
the volume is not high enough, check the Volume limiter to see if it
is set too low. Details are on page 24.
,, Press
MENU
when the Balance function is highlighted to
enter the BALANCE adjustment display. Then press + or - to
adjust the left/right balance until the sound seems to
originate from a point halfway between the speakers.
Note: The balance control will not affect the audio from the
surround speakers.
,' Press MENUwhen Rear spkrs (speakers): on/off function is
highlighted to select Rear spkrs: on or Rear spkrs: off.
Leave this function set to Rear spkrs: on to hear sound from
the rear (surround) speakers.
,, Press MENUwhen Rear volume is highlighted to enter the
REARVOLUMEadjustment display. Press + to increase the
volume from the rear surround speakers or - to decrease the
surround speaker volume.
,, Press MENUwhen the Input balance function is highlighted
to enter the INPUTBALANCE display. The INPUTBALANCE
display is used to balance the left and right audio signals
coming into the set for optimum surround sound
performance. Most of the time you will want to leave this at
mid scale. If the sound coming from your surround sound
speaker(s) has a lot of voices (instead of mostly background
ambience), you may want to adjust the INPUTBALANCE
display to minimize the voices. With the INPUTBALANCE
display on the TV screen, press the + and - buttons to move
to the right and to the left of the scale. Stop at the point
where voices are minimal in the surround speaker(s).
Note: When adjusting the INPUT BALANCE, the front speakers will
automatically be muted. This allows you to hear only the sound
from the rear surround speakers. Adjust the sound to minimize
voices and to give mostly background ambience.
" Press MENUwhen Center volume is highlighted to enter the
CENTER VOLUMEadjustment display. Press + to increase the
volume from the center channel or - to decrease the volume
from the center channel.
,, Press MENUwhen Noise seqncer (sequencer): on/off is
highlighted to select either Noise seqneer: on or off. The
noise sequencer supplies audio noise to each audio channel
(left, right, center, and surround) one at a time. This allows
you to check and adjust the volume level and balance to
each channel as well as check to see if all the speakers are
working correctly.
,' Press MENUwhen Done is highlighted to exit the PROLOGIC
SETUP menu.
Saving, Restoring, and Returningto Factory Settings
The TV will remember your settings-even when you turn
it off. To prevent losing your personal settings because
someone changes them accidentally, you can save them
using the MEMORY M ENU.After the settings have been
saved, you can restore them at a later date using the
MEMORY M ENU.The MEMORY M ENU also lets you easily
restore the PROLOGIC SETUP menu to its factory settings.
Details are on page 39.