ProScan PS35682 Owner's Manual page 10

8 Add or erase channels to the channel memoryscan list.
You can add and erase channels from the channel memory
scan list as desired. Details are on page 47.
1 Display the CHANNEL MEM(memory) menu on the TV
screen.
1 Press MENUto display
the
MAIN MENU.
2 Repeatedly press - or
+ to highlight Setup in
white. 1_
3 Press MENUagain to
display the SETUP
menu.
4 Repeatedly press - or---l_
+ to highlight Channel
memory in white.
5 Press MENUagain to
display the CHANNEL
MEM menu.
Press the MENUbutton to select (underline) the Channel
function. Enter the number of the channel you want to add
or erase from the channel memory scan list. Press + to
enter a channel with a higher number or press - to enter a
channel with a lower number.
_ ress+ to enter a
channel with a higher
number.
Press - to enter a
channel with a lower
number.
Press MENU again to exit (remove underline) the Channel
function.
Then press - to highlight the Scan List: out/in function. Then
press MENUto add or erase the channel from the channel
memory scan list.
• Press MENUto select Scan List: in to add a channel.
To add a channelto
the channel memory
scan list.
•Press
MENU
to select Scan List: out to erase a channel.
To erase a channel
fromthe channel
memory scan list.
To erase or add other channels, press + to go back up the
menu to the Channel function. Then repeat steps 2 and 3
for each channel you want to add or erase.
When you are finished, press the CLEARbutt(m on the
master remote or press the - button to highlight Done and
then press the MENUbutton to remove the menu from the
screen.
Note: The menu will automatically disappear from the screen
within a few seconds if no button is pressed.