ProScan PS35682 Owner's Manual page 16

Time and Day-of-Week Display
shows the current time and day
of the week (after the clock is
set) whenever you turn on the
TV, change channels, or press
the DISPLAY button on the master
remote control.
I
------Channel NumberDisplay shows the
channel number whenever you turn on
the TV, change channels, or press the
DISPLAY button on the master remote.
Antenna B appears with channels from
the ANTB input. This display also
shows PIP (Picture-In-Picture), channel
label, and sleep timer information when
they are activated.
.°°o.- ................................................................................................ ..%
®
Stereo HeadphoneJack
This headphone jack lets you connect optional
headphones to listen to the audio from the PIP (Picture-
In-Picture) at the same time others are listening to the
audio from the main picture. You can also enjoy private
listening to the audio from the main picture without
disturbing others. If the plug on your headphones does
not fit this jack, adapters are available from your local
electronics supply store.
Plugging in headphones will not automatically mute the
sound from the TV. This special feature enables
someone with a hearing impairment to attach a set of
headphones, adjust the headphone volume, and enjoy a
program with others in the same room listening at a
lower volume. You can also enjoy private listening.
Details are on page 25.
RemoteControlSensor
Receives commands from the remote controls. When
using a remote control, point it toward this sensor.
Details are on page 8.
Power Indicator
The power indicator lights whenever the TV is turned
on.
Q
- and+ Buttons
Use these buttons after you have pressed the MENU
button to enter or adjust functions.
MENU Button
Press MENUto display the MAINMENU. Use +,,and -
and MENU to select and adjust other menu functions.
Details about using each menu function begin on
page 13.
CHANNELButtons
Press CHANNEL A to see the next higher channel in
memory, or press
CHANNEL V to
see the next lower
channel in memory. Your TV will automatically
program channels into the channel memory for you
when you start the Autoprogram feature described on
page 46. You can also add or erase individual
channels as described on page 47.
VOLUMEButtons
®
Press
VOLUME A tO
increase volume, or press
VOLUME V to decrease volume. The volume display
will automatically appear on the screen when you
press a VOLUME button.
POWER Button
Press once to turn on TV. Press again to turn off TV.
12