ProScan PS35310 Owner's Manual page 7

7 AutoProgramthe TV's channel memory.
To start the TV autoprogramming itself, press the MENU
button repeatedly to select the SETUP MENUand then
press the + button to display the setup functions. Press
MENU again to select the AUTOPROGRAM function, then
press +. Details are onpage 15.
Chan Ctrl: Normal
You can also add and delete channels from memory as
desired. Press MENUrepeatedly to select the SETUP
MENU,then press + to display the setup functions. Press
MENUrepeatedly to select the CHANMEMfunction, then
select the desired channel number and press + to add or
-to erase the channel. Details are on page 15.
9 Review menus.
1 To see the video
menu, repeatedly
press MENUbutton
to select VIDEO
MENUand then
press +.
Repeatedly press
MENUto select
desired function
and then press + or
- to adjust it.
Details are on
page 15.
MENU button
- and + bu_ons
To see the audio menu repeatedly press MENU to select
the AUD*O MENU and then press +. Repeatedly press
MENU to select desired function and then press + or - to
adjust it. Details begin on page 14.
To see the setup menu,
repeatedly press MENU to
select SETUP MENU and
then press +. Repeatedly
press MENU to select
desired function and then
press + or - to adjust it.
Details begin on page 22.
Sleep Timer 0:00
Set Alarm ..................
Chan Label
Parental Ctr: Off
Cfi_fi etri: Nor_ai
Chan Mem: Sterna
O.'2!.
f'b
Set the clock.
1 Repeatedly press the MENUbutton to select the SETUP
MENU and then press +. Press MENUrepeatedly again to
select the CLOCK SET display.
!il iii:i!i !!iil iiiiiii!i i iii! i i ii iii!;i_iiiii!(i
VCR 1 Chan: Off .....
VCR 2 Chan: Off
Cable Chan: Off
_,udio Menu
2 Chan! Off
Cable Chan Off
Clock Set _Hr ÷Mifi'
10 Label channels if desired.
The labeling feature lets you add names (or labels) to
channels as desired.
To label a channel, repeatedly
press MENU to select the
SETUPMENUand then press +. Repeatedly press MENU
to select the CHANLABEL display, and then press + to
enter the function.
2 Press and hold the - button to select the correct hour.
Then press and hold the + button to select the correct
minute.
3 The correct time will now appear on the screen
whenever you change channels or press the
DISPLAY
button.
Parental Ctrl: Off
Select the channel number you want to label.
Repeatedly press VOLup or down on the remote control
to select the desired character, and then press + to move
to the next character block. When the first name is
finished, you can select another channel to label.
Details are on page 19.