ProScan PS35310 Owner's Manual page 33

After the AUDIO button is programmed, the buttons described
below will operate the basic functions of most audio equipment.
Depending on the age, brand, model, and type of audio
equipment, some models may not be able to respond to all the
function buttons listed. You will want to experiment with each
button to determine the exact function for your component.
Remote Buttons That Control Audio Equipment
POWER B UTTON P ress to turn on
component. Press again to turn off.
Some components will turn on
automatically when you press
AUDIO
button.
PLAY BUTTON Press to start component
playing.
REWIND BUI-ION
Press while component
is stopped to rewind tape.
RECORD BUTrONPress to start recording.
NUMBER BUTTONS P ress two numbers to
select a channel directly.
AUDIO BUTTON P ress this button to turn on
the audio component and put remote in
"Audio Mode" so other buttons will
control the audio component. Press the
TV button to put remote back into "TV
mode".
......... FAST FORWARD BUTTON
Press while
component is stopped to fast forward
tape.
...........
PAUSE BUTTON P ress to pause play or
record. To release pause, press again.
STOP B UTTON Press to stop whatever the
component is doing: playing, recording,
rewinding, etc.
_ CHANNEL UP OR DOWN BUTTONS
Press
to
select the next higher or lower channel
in the component's channel memory.
..... --.ANTENNA BU'I-rON
Performs various
functions depending on the type of
equipment. Experiment with this
button.
29