ProScan PS35310 Owner's Manual page 14

TIMEANDCHANNEL N UMBER DISPLAYS s how the current time
(once set) and channel number whenever you turn on the TV,
change channels, or press the remote's OISPLAY button. These
displays also appear whenever you change volume with the
VOLUME b uttons on the front of the TV.
REMOTE C ONTROL SENSOR receives commands from the
remote control. When using the remote control, point it
toward this sensor.
/
/
/
/
/
/ POWERINDICATOR l ights whenever the TV is turned on.
VOLUME BUTrONS
Press VOLUME u p to increase volume, or press VOLUME d own
to decrease volume. The volume display will automatically
appear on the screen when you press the VOLUME buttons.
POWERBuTroN
Press once to turn on TV. Press again to turn off TV.
k, \
\
\
\
\
\
\
\
-'_"_ CHANNEL B UTrONS
Press CHANNEL
A to see the next higher channel in memory,
or press CHANNEL v to see the next lower channel in memory.
Your TV will automatically program channels into the
channel memory for you when you start the AOrOPROGaAM
feature described on page 21. You can also add or erase
individual channels as desired as described on page 22.
STEREO HEADPHONE JACK lets you connect
an optional
headphone to enjoy private listening without disturbing
others. If the plug on your headphones does not fit this jack,
adapters are available from your local electronics supply
store.
Plugging in headphones will not automatically mute the sound
from the TV. This special feature enables someone with a
hearing impairment to attach a set of headphones with
separate volume control and enjoy a program with others in
the same room listening at a lower volume. You can also
enjoy private listening if desired. Here's how to completely
mute the sound except for what's coming through the
headphones.
1 Change the
SPEAKERS: ON/OFF
function to the
OFF
setting as
described on page 12.
2 If an optional amplifier is connected to the TV, turn off the
amplifier to prevent sound from coming through it.
MENU BUTrON
Press MENUrepeatedly until the menu you want to display is
selected, then press + or -. Next press MENUrepeatedly to
select the function you want to adjust, and then press + or -
to adjust the setting. Details" about using each function begin
on page 11.
-- - AND+ BUTI'ONS
Use these buttons to enter or adjust functions after you have
pressed the MENU button.
10