ProScan PS35310 Owner's Manual page 29

Cable Box Channel Setup
The CABLE CHAN function lets you program to which channel
the TV will automatically tune when you press the
OSS.CABLE button on the remote. This is handy if you have
to connect a cable box to your TV. You will no longer
have to remember the output channel of the cable box
because the TV will remember for you.
For example, if you connect a cable box to the TV's
CABLE/ANTENNA connector (as shown on page 35), you will
no longer have to remember to select channel 2, 3, or 4 on
the TV to see what's coming from the cable box. By
entering the cable box's output channel (usually 02, 03, or
04) next to the CABLE CHAN function, the TV will
automatically tune to that channel each time you press the
CABLE button on the remote.
This function is especially convenient if you have a
remote-controllable cable box that can be operated by the
OSS.ABLE button on the remote as described on page 39.
Pressing the OSS.CABLE b utton will then not only switch the
remote to cable mode but will also automatically tune the
TV to the proper channel for viewing the picture from the
cable box.
Setting Up Cable Box Channel
with or without remote
1 Repeatedly press the MENUbutton to select
SETUP
MENUand
then press + to display the setup functions.
_udio Menu
lt'_[ta (I IIi Lfj [t,] i I I
2 Repeatedly press
MENU
to select the
CABLE CHAN
function.
iVCR 1 Chan: 91
VCR 2 Chan:92
I[I)_'1 e"l _ J[l] i_. 11114] i
Enter the channel number you want to program by prcssing
two digit buttons on the remote control. (The channel
number you enter is the channel to which the TV will tune
automatically when you later press the CABLEbutton on the
remote). The TV will change to the channel you select. This
will help you to confirm that it is indeed the channel you
want the TV to automatically tune. Most cable boxes output
their signals on either channel 02, 03, or 04.
8:27_M
r_
VCR 2 than: 92
I[1'_ _ r'_Ii,J i _ iill, Ji
Press the + button to program the channel number you
selected into the
CABLE CHAN
function memory.
VCR 1 Chan: 91
VCR 2 Chan: 92 :ii_,,
Note: Pressing the button here will turn off this feature and
display CABLE CHAN: OFF again.
25