ProScan PS35310 Owner's Manual page 21

Setting the Sleep "timer
With the Sleep Timer, you can program your TV to turn
itself off after a period of up to four hours. This is useful
when you want to watch TV for a selected length of time
before going to sleep.
The Sleep Timer will begin to count down to zero. The word
SLEEPwill appear on the screen whenever you change
channels or press the TVbutton to let you know the Sleep
Timer is activated.
Setting Sleep Timer
with or without remote
1 Repeatedly press the MENUbutton to select
SETUP MENU
and
then press + to display the setup functions.
Audio Menu ........
The SLEEP TIMERshould be selected. If not, repeatedly press
the MENUbutton to select it.
:Off
Alarm
than Label
Parental Ctrl: Off
Press the + or - button to select the length of time (up to four
hours) you want the TV to stay on. Each press of the button
increases the time 30 minutes (up to four hours). Then the
time display will start over with 0:00.
Chan Label
Parental Ctrl: Off
1 hour and
30 minutes
The display will automatically disappear from the screen in a
few seconds. It will disappear more quickly if the DISPLAY or
CLEARbutton is pressed.
The amount of time remaining before the TV shuts itself off
will appear in the SLEEPTIMERmenu whenever you press the
MENUbutton to select the SETUPMENUand then press +.
-_1--- 1 hour and
;t Alarm 28 minutes
Chan Label
Parental Otrl: Off remaining
6 When the Sleep Timer counts down to 0:00, the SLEEP TIMER
display will appear on the screen for a few seconds. Then the
TV will turn itself off. If you want the TV to stay on when
this display appears, press the vv button on the universal
remote. The Sleep Timer will be cancelled. To add more
time to the Sleep Timer when this display appears, press the +
button.
Clearing Sleep Timer
To cancel the sleep timer, enter the Sleep Timer function and
then press the + or - button until the screen shows 0:00.
-&
B., _.
17