ProScan PS35310 Owner's Manual page 46

Special RecordingontoVCR
This connection only allows you to record on the VCR
whatever is currently being displayed on the TV screen
except for menus and special effects. This is not a
common application for recording with your VCR, but you
may find it useful in certain situations. You'll also be able
to record signals from another VCR (or similar device) that
is connected to the TV's INPUT 1 or INPUT 2 jacks.
The TV must remain turned on during recording. If you
change channels on the TV, the channel change will be
recorded on the VCR tape unless you pause the VCR
during recording.
Because your TV is cable-compatible, this application
may be used to record cable-TV programs from the TV
onto a VCR that is not cable-compatible.
You may also want to use this connection to dub or edit
VCR tapes with two or three VCRs. By connecting one
VCR (or camcorder) to the INPUT 1 jacks and another VCR
(or camcorder) to the INPUT 2 jacks, you'll be able to
selectively edit and record whatever is playing on the TV
screen onto a third VCR (or camcorder) connected as
shown here to the SELECT O UTjacks.
If you connect a surveillance system to your monitor,
you'll be able to record what the camcorder is displaying
on the TV screen by connecting a VCR (or camcorder) to
the SELECT O UT jacks as shown here. To see the signal from
a device connected to the INPUT 1jacks, select channel 91.
Select channel 92 to see the signal from a device connected
to the INPUT 2jacks.
Beck of W
Back ofVCR
T
flI-Fl OUT SELECTOUT
@
INPUT 1 -
L CABLE]ANTENNA
_,/IDEO
'OUT
To see the signal from a device connected to the INPUT 1
jacks, select channel 91. Select channel 92 to see the
signal from a device connected to the INPUT 2jacks.
Note: Signals from the S-VIDEOconnector do not come through the
SELECT O UTjacks. To record from an S-VHS component, remember to
also connect the regular video cable to the VIDEO INPUT1jack and then
tune to channel 91.
Menus (video, audio, setup), displays like clock and channel, and the
inset picture in picture-in-picture do not come through the SELECTOUT
jacks.
S-VHS (SuperVHS) VCR
This connection allows you to record TV
programs and play back tapes. If your cable
company requires a decoder box for premium
channels, refer to page 38.
Connect the S-VIDEO OUTconnector on the back
of the VCR to the S-VZDEO connector on the
back of your TV using an S-VHS cable.
Remember to connect the audio cables from
the VCR to the INPUT I LEFT and
RJMONO
jacks on
the back of the TV. The S-VHS cable carries
only video.
S-VHS Cable* Isuch aS#1860081 eackofW
Operation: If the S-VHS VCR is connected
as shown here, select TV channel 90 to view
whatever the VCR is playing. The word
S-WDEO will appear on the TV when you select
channel 90. You can program your TV to
automatically select channel 90 when you press the VCR1
or VCR2/LO button. Details are on page 23.
*Optional accessories are available from most dealers and electronics
supply stores. Mail order form is on page 31.
t Audio/Video Cables" Coaxial Antenna Cable*
(such as AH077G} (such as AH037 or AH065G)
Note: Renlcmbcrto also connect the videocableif you plan to use this
VCR forpicture-in-pictureviewing or if you want to use the SEtEcrour
jacks for recording. When recording from SELECT O UTjacks, tune the
TV to channel 91 to see the signal from the S-VHS VCR.
42