Dubbing Images From A Card To A Tape - RCA CC9381 User Manual

Still Camera
Dubbing Images from a Card to a Tape
Follow the' st_'ps b_'low to n'cord still image's from a card in the camcord_'r to a tap_ _ in
t[/_ _ CalTtCOI'd _q'.
1. Insert the' r_'cord_'d card and a MiniI)V cassette"
in the" camcorder.
[3PLAYBACK 180-0808
RORMAL PACE1 !2
PB I I _ I _ I
Card-to-Ta _e indicator
I REC I
Card to tape dubbing
2.
3.
Set the I)SC MODE switch to [APE.
Hold down the Lock button and set the POWER
switch to PLAY. Play back the tape and locate the
place on the tape where you want the image to
be recorded.
4.
5.
6.
7.
Set the I)SC MODE switch to CARD. If the image
you want to copy does not appear, press <1 or
I_ to scroll through the thumbnail images.
Press PB to select the highlighted image.
• The selected image is displayed full screen.
Press the REC SIARTiSTOP button. ['he
camcorder enters Record-Standby. ['he card-to
tape dubbing indicator appears.
Press RI!'Cto begin dubbing the image to the
tape.
8. Press RE( 2 again to stop dubbing.
• If you want to dub another image, press < or
to display the image, and then repeat steps
5 through 8.
9. Press (:A3iCEL when you are finished.
124