Table of Contents
Advertisement
¢@nnec_i@ns
_
Setup
Attach the Lens Cap to the Camcorder
1.
2.
To prevent losing the lens cap, attach the
string to the camcorder
as".%t?olgt? a nd
attach the lens cap to the clip on the
handstrap
during recording.
When
you
are
finished
recording,
press
in
the
sides
of the
lens
cap
and
place
it over
the
lens
of the
camcorder.
Attach a Power Supply
Since" the" battci T must [)_,charged b_,f\)r_"it can b_" clsed the" first tim_', you n_,_'d to else an
AC outh't to
pow_'r
the" camcordor.
POWER switch
®
Power
connector
DC OUT jack
®
Power
cord
1.
Place" the POWER switch to th__ OFF position.
2.
Pull out the" vi_wt'in&,r comph't_'ty
and lift up.
3.
Align the refi'rence
mark on the power connector
with the mark on the camcorder.
Hold the top of the power connector
flush against the camcorder,
and press the
bottom of the power connector
in and slide it down until it locks into place.
4.
Connect the power connector's
small plug with the arrow facing up into the DC
O[}T jack on the adapter/charger.
5.
Connect tim power cord to the adapter/charger,
and insert the power cord's plug
into a working AC outlet.
12
Chap_eg
Advertisement
Table of Contents
