Quick Return - RCA CC9381 User Manual

DSC MODE
switch
POWER switch
Lock
button
O
* g_{ I SI_E 0
i EXPOgURE
PIC. EFFECT
SCEHE MENU
f .
_OIS STOP
_i RETURN
• I • ]SET] I
Quick Return Screen
Quick Return
After playing back tim tape you recorded, you can
quickly return to tim end of the last recording by
using the Quick Return f_'ature on the Mode
screen.
1. Set the I)SC MODE switch to qAPE or DIAL,
and press in tim Lock button to set the
POWER switch to CAMERA.
2. In the Record-Standby mode, press the MENU7
DISPLAY button repeatedly to display the
menu screen.
3.
4.
5.
If tim MANIsAL SETmeml is not hightightd
press • or • to select I_1 and then press SET
to display the MANI_AL 5"/x'Tmenu.
Press •
or •
to select QK RETZ/RA_ and then
press SI£T
Press • or • to select S'/SiRTand
then press
51£T
• SIMRCtJ flashes and the tape begins fast
t\)rwarding or rewinding to the end of the
last recorded scene.
6.
• When tim tape reaches the end of the last
recorded scene, FIXISHED is displayed and
the camcorder enters the Record Standby
mode.
Press the MENUiI)ISPLAY button repeatedly
until the menu screen Rirns off.
Notes:
To cancel Quick Return, repeat the
above steps and select STOP and then
press SET
Quick Return cannot be used if the
cassette has been removed since the
last recording or if no recording has
been made since the cassette was
loaded.
50