Tape Dubbing - RCA CC6254 User Manual

Playback
Power switch
STOP R RETAKE
Playback buttons
54

Tape Dubbing

1.
2.
3.
4.
5.
6.
F
7.
Following the illustration in this chapter,
connect the camcorder and the VCR.
Set the camcorder's Power switch to
on the VCR's power, and insert the appropriate
tapes in the camcorder and the VCR.
Make sure the VCR is in the appropriate AUX
mode and the Record-Pause mode.
Use the camcorder's Play mode to find a spot
just before the edit-in point. Once it is reached,
/
press on the camcorder.
When you're ready to start recording, press
on the camcorder and press the appropriate
record button on the VCR.
When you want to stop recording, press the
VCR's pause button and press
camcorder.
Repeat steps 4 through 6 for additional editing,
then stop the VCR and camcorder when
finished.
, turn
/
/ on the
Chapter 4