Displaying The Date And Time Of Recording - RCA CC9381 User Manual

¢@nnec +@n+ Smtup
Displaying the Date and Time of Recording
Folk_w the procedure below to display the date or date and time. You can display
tlw date and tim_" during both r_'cording and playback. ['he clock cell must be
installed and the time and date set before you can display and record them (see
pa_s 252,S').
DATE
{i ii/ DYLT SAVE OATE÷TIME
I SETTInG
i12H/24H
RETURN
• I • ISETI I
FAOEIGA_MAI JUN. 2.2002
IO:3OAN
50min
I secxl
1.
2.
3.
4.
Follow steps 1 through 4 under 5"t_t l )cZrl{@t
5"azi_g ? b+>:).
Press • or • to select I)ISPLAYand press 5"/z'T
Press • or • to select I)A'It,_ DA7I'J+JIMPJ,or
ObT:and press SEE
• Select !)AT]alto display and record the dato.
• Select DA7E+77ME to display and record the
date and time.
• Select Obl,'to turn off the date and time
display. It will not be recorded.
Press the MENUiI)ISPLAY button repeatedly
until the menu screen turns off. The date or date
and time are displayed.
Notes:
Before recording, make sure that the
date and time have been correctly set
(see pages 26-28). If they have not been
set, the display will be left blank when
playing back the recording. The display
will also be left blank for unrecorded or
damaged portions of the tape
In TAPE-PLAY mode, the current date and
time are displayed when the tape is not
being played back.
Chapter _ 29