Audio Dubbing (Remote Only) - RCA CC635 User Manual

Recording

Audio Dubbing (Remote Only)

Audio dubbing lets you record new sound (audio) in place of previously
recorded audio.
To Audio Dub
1. Place the tape with safety tab intact
into the camcorder.
2. Place POWER switch in VCR.
3. Locate the place you want the audio
dubbing to stop and press
PLAY/PAUSE (PAUSE on remote).
4. Press COUNTER R/M for more than
two seconds on the camcorder to set
the time counter back to 0:00:00.
66
COUNTER R/M Button
POWER Switch in VCR
5. Press COUNTER R/M again for less
than one second to turn on memory
stop (M).
6. Press REW, locate the place you want
audio dubbing to begin, and press
PLAY/PAUSE (PAUSE on remote)
exactly at the beginning of the scene.
PLAY/PAUSE
Button
REW Button
(continued on next page)