Table of Contents
Advertisement
¢@nnec i@ns
Setup
MENU/DISPLAY
Viewfinder
button
monitor
Navigation
Buttons
CONTROL dial
MENU/DISPLAY
Button
The MENI iI)ISPLAY
button
is used
to turn
the
menu
screens
and on screen
indicators
on and off'
in the viewfinder
and LCD monitor.
Press the MENI iI)ISPLAY button repeatedly
to
turn the menus and displays on or off.
CONTROL Dial
The CONTROL dial is used to ad}ust the settings on
the mode and menu screens in the viewfinder
and/
or LCI) monitor. ['hese settings can also be adjusted
using the navigation
buttons on the LCI) monitor.
The instructions
f'or adjusting
mode
and menu
settings
in this manual
use the navigation
buttons.
To adjust the menu settings with the
CON ['ROL dial, f\)Ilow tile rules below. This
method lets you adjust settings using only the
viewfinder.
1.
Rotate the CONTROL dial to highlight the
desired item.
2.
Press the CONTROL dial in to select the
highlighted
item.
VOL +/- buttons
PHONES jack
Open the jack cover, and
connect stereo earphones
with a 3.5 mm plug to the
PHONES jack.
Using Optional
Stereo Earphones
You can ITIonitor the sound using optk)naI stere()
_'arphon_'s during r_'cording or playing back tape's.
Befk)re connecting
stereo earphones,
turn the
camcorder
volume down to the lowest setting.
The built
in speaker
automatically
turns
off
when
stereo
earphones
are connected
It) the
PHONES
jack.
When recording on a tape, you cannot acijust
the volume with the VOL +/- buttons.
10
Chapter
"f
Advertisement
Table of Contents
