Use The Lcd Monitor Or Viewfinder To See What's Recording - RCA CC9381 User Manual

¢@nnec_i@ns _ Setup
Use the LCD Monitor or Viewfinder
to See What's Recording
Navigation
Buttons
LCD OPEN
monHor button
Using the LCD Monitor
1. Remove the h'ns cap.
2. Slide the OPEN button in the direction of the
arrow and open the LCD monitor 90.
3. You can tilt the monitor up to 180 fi)r
convenient viewing while recording.
4. The brightness of the LCI) monitor can be
adiusted clsing the on screen menus
(see page 33).
Notes:
Adjusting the monitor brightness does
not affect the recorded image on the
tape.
When the monitor is open, the
viewfinder automatically turns of_
When the monitor is closed, the
viewfinder automatically turns on,
If the vertical rotation of the monitor is
between 135_and 180°when in one of
the CAMERA modes, both the monitor
and viewfinder are on.
Viewfinder
Eyepiece focus
control on
bottom of
viewfinder
Using the Viewfinder
1. Remove the h'ns cap.
2. Close the moniR)r.
Note: If the monitor is open, the viewfinder
turns off.
3. Pull the viewfinder completely out and lift it
tip.
4. Ad}ust the viewfinder to a comR)rtable viewing
position.
5. Slide the eyepiece R_cus control to adjust the
focus of the viewfinder for your vision.
16
Chap[e_