Table of Contents
Advertisement
Video Light (Optional)
'It) brighten
the scene
when
natural
lighting
is too dim,
the camcorder
can use an optional
vide{) light (s_page
15l).
You can turn
on tim video
light at all times,
set it _) turn
on
automatically
when
additional
light is needed,
or turn
it o_
Use the Optional
Video Light
let the Light AU ['O/OFF/ON
switch.
Set to AUTO
to have
the light turn
on when
recording
in dark
locations.
LIGHTmust
appear
_)r the
light to turn
on automatically.
Set to OFF to turn off the light.
Set to ON to turn
the Iig]_t on whenever
the
_
The video light can only be used when
the camcorder
is on and will not operate
if the NIGHT MODE switch is set to ON.
When not using the video light, turn it
off to save battery
powe_
Even if the battery
level indicator
does
not indicate
a low battery,
the camcorder
may turn off automatically
if the video
light is turned on when you start a
recording
or when you turn on the video
light.
When the Light switch is set to AUTO, the
light may keep turning
on and off
depending
on the lighting
conditions.
If
this happens, set the Light switch to ON
or OFF
A
Cautions
Never operate
the video light closer than one foot to people or
other objects.
The video light becomes very hot. Do not touch it during
use or
right after use Serious injury may result.
Do not place the camcorder
in a carrying case right after using the
light.
Never operate
the video light close to flammable
or explosive
material.
The video light and bulb need to cool for approximately
30 minutes
after use before the bulb assembly is replaced
Replace the bulb
only with Replacement
Part 253403 (6V, 3W bulb).
58
Advertisement
Table of Contents
