Operation Of Pip; Features - Mitsubishi Mr.Slim WD-52627 Owner's Manual

Operation of PIP
You can dispiay programs from anaiog channeis, anaiog inputs, or devices as Pbtureqn-Pbture (PIP). The TV has
a second anaiog tuner for non-scramMed anaiog channeis received on ANT-1 and wiii dispiay them as the PIP sub-
pictures. Digitai channeis and devices can be shown as the main picture but cannot be the sub-pbture. PC svreet_sc_m
be _@wed _ls the m_ti;_pictllre _'ith htl_e PIP.
Press PIP to activate the PIP option. With each press of
the PIP button on the TV remote controi (within seconds
of each other), the PIP wiii cyclic through the foiiowing
dispiay options:
Side-by-side
pictures
MA_N
PICTURE Side-by-Side
Ant-1 2 X)OLX
Standard
Stereo SAP
TV@G DLSV
SQVl
PIP
(avaiiabie for PC
viewing)
shown as the main picture. PC images can oniy be the
Moving PIP Image
If no menus are on screen, press ADJUST A, V, _, or _ to
move the PIP dispiay anywhere on the main screen.
Freezing the PiP and Side-by-Side
Press PAUSE to freeze the PIP and side-by-side images.
Press PAUSE again to return to a "Hive" image.
Ant-12 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQVl
PIP off
To turn PIP off, wait at bast 10 seconds and then press
PIR The next time you activate PIP, the last-used PIP
option wiii be displayed.
Changing PIP Device
When PIP is dispiayed, press PIP DEVICE to change the
PIP picture source device. A menu simiiar to the Device
Seiection menu wiii be dispiayed.
Changing PIP/Side°by-Side ChanneJs
Press PIP CH to scroii up and down through memorized
channeis on ANT-1 and ANT-2.
Exchanging Program Images
Press EXCH to exchange the main picture and the PIP
picture. Pictures from digitai channeis can oniy be
iMPORTANT
The side-by-side option cannot show the
same channel or device on both sides.
PIP is not compatible with signals from
media cards.
You can view only one HDMi input at a
time with the PIP or side-by-side feature.
!
82 Chapter 6. Additional Features