Audio/Video Menu - Mitsubishi Mr.Slim WD-52627 Owner's Manual

Audio/Video Menu
Figure 24
Figure 24. Audio/Video Menu, Settings
A/V Memory Reset
AiV Memory Reset allows you to seHect the device which
will have the A/V Settings returned to the originaH factory
setfings. To return a device's memory to the originaH
factory settings, seHect the device and then press ENTER.
TV Speakers
When an AiV receiver has not been set up in
NetCommand, this seHection will turn the TV's internaH
speakers on or of L You may seHect Off when sending
the sound through a separate stereo system or surround
sound AiV receiver.
This option is unavaiHabHe(grayed out) when
NetCommand ® is enaMed and you have seHected the AiV
receiver icon from the Device SeHection menu. In that
case, Netcommand automatically turns the TV speakers
off. See the NetCommand information for further
instructions.
Note: To prevent damage from a sudden increase in
volume, make sure the TV volume is set to low before
setting speakers to On.
Each device has its own AiV memory. Select the device
in AiV Memory Reset, then select Audio or Video to
adjust the device's individual settings. Press ENTER,
and the menu is removed and the individual settings are
displayed.
Use ADJUST Akor Y to select the individual settings
to be adjusted. Use ADJUST "_ or _ to make the
adjustment. For descriptions of the individual AiV
settings see AiV Setting Descriptions, pages 78 and 79_
Video Mute
Video Mute lets you display a blue background when no
signal is being received on Inputs 1-3 and COMPONENT
1-3.
FiJm Mode
Auto is the default setting and will automatically detect
and apply film decoding correction for signals that
originated on 24 frames per second film cameras and
then were converted for broadcast to 30 frames per
second video.
When the original signals originated on 30 frames per
second video cameras, the Auto setting will automatically
apply video decoding, the same as used with the Off
setting. Try the Off setting when the TV seems to have
difficulties and adds too many jagged edges to the
images.
Film Mode is not effective for high definition signals.
Using the AUDIO or VIDEO Button on
the Remote ControJ
To adjust individual Audio or Video settings directly with
the remote control:
1. Press AUDIO or VIDEO to cycle through the available
settings.
2. Press ADJUST 4 or _ to adjust the setting. After
5 seconds of inactivity, the setting display will
disappear.
Chapter 5. TV Menu Screen Operations 77