Replacement - Mitsubishi Mr.Slim WD-52627 Owner's Manual

Appendix H: Lamp Cartridge Replacement
Before you repHace the Hampcartridge pHease note the following:
CAUTION: (f the te(evision is on, press POWER to turn it off, AHow the te(evision to coo( for
one hour before attempting to repmace the mamp cartridge.
LAMP UFE
The Hightsource for this television is a Hamp,which is part of a Hamp cartridge assembHy, The actuaH Hifeof the Hamp
in this television can vary, based on the Hamp itseHf,the air temperature around the TV whiHe it is operating, and your
viewing patterns. Warmer air or poor ventilation shortens the lamp life, as does turning the television on and off
frequently.
When the end of the lamp's life is approaching, the TV displays a warning message for one minute when you power on
the TV. The message will reappear the next five times you turn on the TV. After you change the lamp cartridge, you
must reset the lamp reminder through the TV Setup menu. Otherwise, the warning message will appear again too soon.
Mitsubishi warrants the lamp for one (1) year from date of the original purchase at retail. It is likely, however, that the
lamp will last significantly longer than this.
TO ORDER A NEW LAMP:
i While Under Warranty
Call (800) 332-2119_ Please have model number,
serial number, and TV purchase date available.
After Warranty
Call (800) 553-7278_ Order lamp part number
915P026010_
Do not remove the lamp cartridge immediately after turning off the television. You may get burned because of the
lamp's high temperature. Allow the television to cool for one hour before attempting to replace the lamp cartridge.
Do not remove the lamp cartridge except when replacing it. Careless treatment can result in injury or fire.
Do not touch the lamp glass elemenL It may be very hot and break, causing injuries or burns.
Be sure not to insert any metal or flammable object into the lamp cartridge opening, as it may cause fire or electrical
shock. If any object is inserted into the opening, unplug the AC cord of the TV and contact your dealer for service.
Install the lamp cartridge securely. Failure to do so may cause a fire.
Do not touch the lamp glass elements. Oils from your fingers may cause premature lamp failure.
The lamp in this product contains mercury. Disposal of mercury may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance at:
www, eiae,org_
__urs through the TV setup
repla?e the lamp
__se, the lamp warning
Appendices
109