Using The System Reset Button; Using The Reset Menu To Reset The Tv - Mitsubishi Mr.Slim WD-52627 Owner's Manual

Projection television
Hide thumbs Also See for Mr.Slim WD-52627:
Table of Contents

Advertisement

Additional
Information
Using
the System
Reset
Button
If the TV doesn't respond to either the remote controH
or the front paneHcontroHs or will not power off, press
the SYSTEM RESET button on the front paneHwith a
pointed item such as the point of a bah point pen or
end tip of a papercHip.
The TV will turn off and the green LED will flash
quicMy for about one minute.
When the green LED
stops flashing, you may turn on the TV again. The
changes you made wNe the TV was most recently
on, before you used the SYSTEM RESET button may
be Host;the changes you made previousHy, however,
are not Host. OnHythose changes since the Hastpower
On may be Hostwhen the system reset button is
pressed.
All other settings are retained.
Using the Reset Menu to Reset the
TV
Read on-screen
warnings
before
proceeding,
as some
user data or
settings
may be erased.
1_ Select any device from the Device Selection
menu. Press TV MENU followed by 1,2,3 to see
the RESET SERVICE MENU to reset the TV.
2_ Select Reset System Defaults (CAUTION:
All
settings, except V-Chip, will be reset to the
Demo Mode
This TV has a demo mode for use in retail stores. To turn the demo mode On/Off, press the following buttons in
sequence:
MENU, O, QV, 0
Chapter
1. Television
Overview
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mr.slim wd-62627

Table of Contents