Mitsubishi Mr.Slim WD-52627 Owner's Manual page 59

Using the GUIDE Button to Display ChannelView TMand Menus
The GUIDE Button
Hease refer to the separate TV Guide On Screen® User's Guide for detaiHs about using the GUIDE button with TV
Guide On Screen. When you are not using the GUIDE for the TV Guide screens, pressing GUIDE allows you to see
NetCommand® controlled program guides or menus.
GUIDE and Devices
(1394 or mRControlled)
For NetCommand compafiMe satellite receivers and
some came boxes, GUIDE will display the on-screen
programming guide for the receiver or cable box. Press
ADJUST A 'V ,_ _ and ENTER to navigate the displayed
Guide. For NetCommand compatible satellite receivers,
you may also be able to use the number or other
additional buttons.
Recording a Current Program
To record a current program, press REC (record) when
your program choice is highlighted on the program list
in ChannelView. A red "R" will be added after the input
name. The TV will immediately switch to the selected
channel and start recording.
For NetCommand compatible DVD players, GUIDE will
display the DVD disc "top" menu (not the setup menu).
For AiV Discs, pressing GUIDE will display the Track List
screen For IEEE 1394 devices with digital connections,
press GUIDE twice to display the device's Guide. For
media cards, pressing GUIDE displays a JPEG thumbnail
menu (video) or a Play list menu (audio).
GUIDE and the Device SeJection Menu
For compatible traditional VCRs, pressing GUIDE when
the VCR is highlighted on the Device Selection menu will
change the VCR's input.
When the AiV Receiver icon is highlighted in the Audio
Section, pressing GUIDE switches the A/V Receiver from
analog audio to digital audio and vice versa, if supported.
GUIOE and the Record To Menu
When in the Record To menu, pressing GUIDE will display
the current list of programmed recordings. Please see
Record List, page 57 for more information.
Figure 11. ChannetView screen, current programs
Recording Future Programs
To record a future program, press ADJUST ,_ or Vto
select the channel you want to record from. For detailed
program information, press ADJUST _, to return to basic
information press ADJUST 4. Press REC (record) when
your choice is highlighted. A red "R" will be added after
the input name. The message, The recording has been
added to the Record List will display. To view, change or
cancel a recording, use the Record List (page 57)_
GUIDE and ChanneJView
Figures 11 and 12
ChannelView is available for antenna inputs not
associated with TV Guide. Press GUIDE while viewing
ANT-1 or ANT-2 to display a list of available memorized
digital channels (D) and analog (A) channel information
(if available from the broadcaster). This list is called
ChannelView
TM
ChannelView for digital channels will show the major and
sub-channels (or bitstreams). Analog channel information
will display as senL Press ADJUST A or V to scan
through the all the channels in memory one by one. To
cycle through the choices quickly, press CH A or V.
For detailed program information, press ADJUST !t_
, to return to basic information press ADJUST "_. This
information is sent by the broadcaster. If limited data
is shown or no program data appears, it is because the
broadcaster is not sending the information. This is not a
defect of your TV.
Figure 12. ChannetView screen, future programs
Chapter 4. IEEE 1394 Devices and NetCommand-ControHed Recordings 59