Mitsubishi Mr.Slim WD-52627 Owner's Manual page 54

[EEE 1394 Devices and NetCommand® Control
See pages 30-31 for information regarding compatible IEEE 1394 devices and connection styles. The TV is not able to
contro[ IEEE 1394 devices that use other types of control protocols. Incompatible digital audio, video and/or control
information will still be able to pass from one device through the TV to another device on the network. These incompatible
devices may not appear on the Device Selection menu or in the Review screen of the Edit NetCommand menu.
NetOommand Control of Digital Devices Using the "Learn" Feature,
Some [EEE 1394 devices such as came boxes or satellite receivers wii[ not have compatible digital control signals
or require the use of the device's own remote control Some of these [EEE 1394 devices wii[ not display on-screen
information through the [EEE 1394 connection and wii[ require using an analog connection for on-screen displays. In
many cases, to control these digital devices, the Learning feature of NetCommand can be used.
1. Place an [R Emitter for NetCommand in front of the device's remote control sensor (see [R Emitters, page 32).
2. On the Name for 1394 Device screen (Figure 2, page 55) use ADJUST and ENTER to check mark the Analog
Connection box.
3. Select the device type on the [EEE 1394 Device Type screen (Figure 3, page 56) of SAT or similar tuning device
4. If desired, using the ADJUST buttons enter a custom Name on the Name screen (Figure 20, page 50).
5. At the Device screen, Select "Other" as a manufacturer and then highlight "Learn" and press Next (Figure 4, page
43).
6. Follow the device [earning instructions found on the screen(s) or in the Edit NetCommand section of Chapter 3.
Z The Connection screen (Figure 5, page 56) foiiows the learning screens. If analog connections are used, select the
correct inputs. If only digital connections are used, do not check the video or audio boxes.
8. Proceed with the Finish screen.
This wiii allow NetCommand to use the learned remote control signal to control these [EEE 1394 devices.
Note: When using the NetCommand learning feature for [EEE 1394 devices that do not have analog connections,
the GUIDE function wiii require pressing GUIDE twice. The first press of GUIDE wiii display the TV's digital channel
guide. The second press wiii display the program guide for the device if an [EEE 1394 Guide is available.
54 Chapter 4. IEEE 1394 Devices and NetOommand=Oontrotled Recordings