Setup Menu; Operations - Mitsubishi Mr.Slim WD-52627 Owner's Manual

Setup Menu
Setup Menu
Figure 8
Figure 8. Setup Menu, Language Option
DispHay the on-screen menus in either Engiish or Spanish
(Espa_oi). The first time you powered On your TV, you
were requested to seiect an on-screen menu ianguage.
If you choose to change the seiecfion, aii menu text wiii
immedbteiy switch to the ianguage of your chobe.
To iisten to audio in other ianguages (when avaiiabie), see
the section of this Owner's Guide covering audio settings.
Memorize ChanneJs
For Antenna 1 (Main} or Antenna 2 (Aux}
To start channei memorization, first seiect an input
according to the tabie bellow.
Input
Ant-1 Air
Ant-2 Air
Ant-1 CaMe
Ant-2 Cabie
Condition
When connected to an indoor/
outdoor antenna
When connected to direct cable
Press ENTER to start the automatic channel-memorization
process. The memorization process is started separately
for each antenna selection.
During the memorization process, all possible channels
on the selected antenna are scanned twice. Analog
channels are scanned first and then the process is
repeated for digital channels.
To stop the automatic channel-memorization process
before the process is completed, press CANCEL.
Channels memorized before you pressed CANCEL are
retained in memory. If you start the memorization process
again, all previously memorized channels for the selected
antenna input are erased and the process starts over from
the beginning.
After memorizing channels, the channels in memory
can be accessed in ascending or descending order by
pressing CH _, or _'. Select the Channel Menu to access
further channel-editing features such as channel add or
delete, channel name, and SQV custom favorite channel
memories_
When you use a CableCARD
TM,
the complete list of
available channels is provided through the CableCARD.
As a result, the Ant-1 channel-memorization options are
not available and are shown grayed out on the screen.
In the TV Guide On Screen@ system, the channels
displayed and the order in which they are displayed in
the Guide is independent of the channel-memorization
process. Refer to the TV Guide On Screen Interactive,
Program Guide User's Manual for detailed instructions
on editing channels shown in this guide.
CJock
You may choose to manuaiiy or automaticaiiy set
the chock that your TV wiii use for recording or timer
functions,
Figure 9
To manually set the clock, you need to select the
current time, current date, time zone for your area and
the Daylight Savings time setting.
Figure 9. Time Menu, Manual Clock Setting
Press ADJUST A or V repeatedly to slowly select the
hour or press and hold to quickly select the hour. Press
ENTER to move to the minutes options. Press ADJUST
_, or V to select minutes.
Chapter 5. TV Menu Screen Operations 65