Operation Of Pip And Pop - Mitsubishi WS-48613 Owner's Manual

Operation of PIP and POP

Picture-In-Picture (PIP) and Picture-Outside-Picture
(POP) features allow you to view programming in different
ways. While watching the main screen, you can display
programs from other channels and other inputs. You can
display a single PIP, side-by-side pictures, three POPs, or
nine POPs Activating the PIP and POP
Press PIP/POP to activate the PIP/POP option. With each
press of the PIP/POP button on the TV remote control
(within 3 seconds of each other), the PIP/POP will cycle
through the following display options:
MAIN
Side-by-Side
PICTURE
MAIN
PICTURE
POP 1 POP 2
MAIN
POP 4 POP 5
PICTURE
POP 7 POP 8
��������������
��������
����������
����������
����
����� ��� � � ��
� �������
� ����� � ��
���� � ��� �
� ���
• POP
side-by-side
pictures
POP 1
• 3 POP
POP 2
POP 3
POP 3
POP 6
• 9 POP
POP 9
���������
• PIP large
� �� � ���
• PIP small
• PIP/POP: off
To turn PIP/POP off, wait at least 10 seconds, and press
PIP/POP. The next time you activate PIP/POP, the last
used PIP/POP option will be displayed
Changing PIP/POP Device
Press PIP DEVICE to change the PIP or POP picture
source device. A menu similar to the Device Selection
menu will be displayed.
Changing PIP/Side-by-Side Channels
Press PIP CH to scroll up and down through memorized
channels on Ant-A and Ant-B.
Exchanging Program Images
Press EXCH to exchange the main picture and the PIP/
POP picture.
Moving PIP Image
If no menus are on the screen, press ADJUST
to move the PIP display anywhere on the main screen.
Automatic POP Switching
When automatic POP switching is active, the TV will
cycle through memorized channels on Ant-A or Ant-B or
strobe pictures from other A/V components in the POP
display. Press PAUSE to pause or restart automatic POP
switching.
Selecting POP "Live" Image
Press ADJUST , ,
"live" image (automatic POP switching must be paused.)
Freezing the PIP and Side-By-Side Picture
Press PAUSE to freeze the PIP and side-by-side images.
Press PAUSE again to return to a "live" image.
Side-by-Side cannot show the same channel
or device on both sides.
ANT-B is not available as the PIP, POP or Side-
by-Side while ANT-A is the main image.
DVI devices are not available as PIP or POP or
Side-by-Side but can be the main picture.
PIP/POP is not compatible with signals from
ANT-DTV, IEEE 1394 or Memory Cards.
,
or to select a different POP
IMPORTANT
, or
81