Projection Tv + Audio System - Mitsubishi TS-5057 Owner's Manual

Projection TV + audio system
equipment you will need
To hook up an audio system, you will need:
• One set of RCA pin audio cables.
procedure
0
Connect the audio cables to the
AUDIO MONITOR OUTPUT
terminals on the back of the
Projection TV. Use the red cable
to connect the right (R) channel
and the white cable to connect
the left (L) channel.
O Connect the other ends of these cables to the AUX IN terminals
on the back of the audio system.
O
Turn off the television's speakers To do this, press the AUDIO
function button on the control pane[ or remote control until you
see the SPEAKER display. Set the speakers to "OFF" by
pressing the adjust (up/down) or right/left button. See "Adjust-
ing the sound," page 63.
O Set the audio system's input to the AUX position.
---'- White Lead
B
Red Lead O
Audio System Rear Terminals
®
Projection TV Rear Terminals
" White Lead
B Oq 3=--
@--
_-- Red Lead
ACTIVE
NE'_VORK
Basic Connections 37