Major Parts Locations; Dm Module Replacement - Mitsubishi WS-48515 Service Manual

MODELS: WS-48515 / WS-55515 / WS-55615 / WS-55815 / WS-65515 / WS-65615 / WS-65815 / WS-73615
Main Components Location (Top View)

DM Module Replacement

1. Unplug the Card Reader USB and 1394 cables from the DM module, and refer to the Chassis Removal
Procedure to slide the chassis towards the rear of the set.
2. Remove screws (a) and remove DM cover.
3. Remove screws (b) and nuts (c).
3. Remove the PCB-E2P from the original DM and plug it into the replacement DM.
4. Remove the PCB-FIF from the DM and install into the replacement DM (V25+ and V25++ only).
5. If CableCard TM is installed, remove.
5. Disconnect all wiring and connectors.
NOTE: After replacement notify customer to contact cable company to reprogram CableCard
(a)
(b)
(a)
(a)
(a)
(c)
(b)
Page 26
TM .
(a)