Viewingthe Picturecomingfrom Your Vcr - Mitsubishi HS-U760 Owner's Manual

_>Important:
O Pointtheremotecontroltowards the remotesensor o nthe TV
andpressthe desired buttons.
Toonce againcontroltheVCR,presstheVCRbutton.
Because o fvariationsamong models, s ome or all buttonsmaynot
work,or theymayoperate differentfunctions than listedabove,
foryourparticularTV. If this occurs, youmayneedtouseyour
TV remote control.
Viewingthe PictureComingfrom Your VCR
This is the most important part of using your VCR, but often the
most confusing: how do you view a picture coming from the VCR?
Before you begin, you should know:
• whether you are viewing a "Monitor TV" or a "Regular TV."
(See page 22.)
Viewing the picture coming from yourVCRif youareusinga
regular T V
O Turn on your TV and tune it to channel 3 or 4.
0 Turn on the VCR by pressing the POWER button.
O Check to see if the "VCR" light on the front panel display is
lit. If it is not lit, press the VCR/TV button until it :is lit.
You are viewing the picture from your VCR!
With this set-up, you will use the VCI_.[_ button when recording,
when viewing tapes or brc.adcast stations through your VCR, or
before using the VCR's menus. You also use the VCR/q_ button
to switch back to normal TV viewing.
Viewing the picture comingfrom your VCR if you are usinga
monitorTV
_>Important:
0
Turn on your TV and switch it to the correct external input.
(For most Mitsubishi TVs, this means pressing the. TV's
INPUT button until you see the words "Ext-l" or "Input-l" on
the screen.)
Turn the VCR on by pressing the POWER button.
You are viewing the picture from your VCR!
If you wish to return to normal TV viewing, switch your TV's
input back to its previous position.
If your system includes a home theater receiver or an A/V
receiver, refer to your horae theater recei ver's owner's guide.
25