Channels Automatically - Mitsubishi HS-U760 Owner's Manual

I Programming the VCR to Receive TV Channels
Before your VCR can receive television channels, you need to
program all of the channels you can receive into your VCR.
Fortunately, our menu system makes this an easy process. This
section will also explain some other channel-related functions.
This section explains:
• Programming channels automatically,
• Using video mute,
• Adding and deleting channels, and
• Selecting a channel.
Programmingchannelsautomatically
Using this process, your VCR will automatically tune in all of the
television stations you can receive. You can later get rid of
unwanted or unused stations.
A special noteto
cable box subscribers
If your local cable box company scrambles some or all stations,
and/or requires you to use a cable box, then your ability to
prog-ram channels' will be limited. The cable box receives all of
your channels and then _ends only one to your TV (and your
VCR), usually on channel 3 or 4.
i
:o
If you are required to use a cable box, you should the choose
"Cable box only" option hi step _ on the next page. Your
HS-U760 will use its spedaI Converter _Box Control technology
to change the channels on the cable box.
If your cable box or cable system seems i+_compatible with your
new VCR, call your cable company. They may be able to provide
solutions to your problems.
_Wc
Your choices are:
Program to record
Advanced Features
Search by time
| II _,.-li i Ilk II. [._HD,."_ _illl
Your choices are:
Set the clock
Customize choices
[=111 [I]II ilI IP, IIII II'; III I I,:II II
Add/delete channels
Set VCR Plus+ Guides
Before you begin, you should:
• have completed all cormections between your VCR, TV, cable,
antenna, cable box, and satellite receiver (if any); (]pages 12-20)
• know how to view the picture coming :;rom your VC.R; (page 25)
• know how to use the menus. (See page 31.)
To program channels automatically:
0 Press the MENU button on the remoge control. You will see
the '%rCR Main Menu" on the TV screen.
Use the ADJUST dial on the remote Lo move the cursor next
to "First Time Set-Up." Turn the shu Ltle ring right.
The "First Time Set-lJp" menu appe_rs on your screen. Turn
the ADJUST dial to move the cursor next to "Memorize
channels." Turn the shuttle ring right.
_Important: If you are recording or playing back a tape, the words "Not
available" will flash and an error message will appear. To correct
this, stop the tape.
33