Mitsubishi HS-U760 Owner's Manual page 34

Chapter 3: Operating YourVCR Usingthe Menusto SettheTime(cont.)
Month June
Year _ I_95
_ --18 Sunday--
Clock I_:00PM
Daylight savings (OFF)
Month June
Year 1995
Date 18 Svnday,
/ \ /1_
Daylight savxflgs (OFF)
Month June
Year 1995
Date 18 Sund,ay
• /i
Daylight savzngs (OFF)
Month June
Year 1995
Date 18 Sunday
Clock 7:30P_
l_._-,Di_-I,i_m_,bm,_ (OFF)
_Important:
The cursor automatically moves to the word "Date." Turn the
ADJUST dial to set the date. Turn the shuttle ring right.
O
The cursor automatically moves to the word "Clock." The hour
numbers and the am/pm indicator will be blinking. Turn the
ADJUST dial to set the hour and andpm at: the same time.
Turning the dial right moves the clock tbrward; turning the
dial left moves the clock backwards.
Turn the shuttle ring right.
The minutes numbers will now be blinking. Turn the
ADJUST dial to set: the minutes. When you have set the
correct time, turn the shuttle ring right.
O
The cursor automatically moves to the words "Daylight
savings." If you are currently following Daylight Savings
Time, use the ADJUST dial to select "ON":; otherwise, use the
ADJUST dial to select "OFF." Turn the shuttle ring right; the
display will return to the "First Time Set-Up" menu and the
clock will start running.
O Press the MENU button ollce to return to the "VCR Main
Menu"; press the MENU button again to turn off the menus.
setting theclockforward or backwardbyone hour(adju:_ting for Daylight
SavingsTime)
You can adjust the Daylight Savings Time setting without enter-
ing the menus. With the VCR turned off, pres_ the INPUT button
on the front panel. If Daylight Savings is currently ON, this will
turn it off and set the clock back one hour. If it is currently OFF,
this will turn it on and set the clock forward one hour. Each time
you press the INPUT button, the Daylight Savings setting will
switch between "ON" and "OFF." Any time you adjust this
setting, check your programmed recordings to be sure they are set
to the correct time.
If you want to adjust the clock when your VCI_ is in stand-by for
programmed recording, simply press the POWER button on the
front panel. This turns off the programmed cecording light, but
the VCR will remain turned off. When you fin!sh adjusting the
clock, press the POWER button again, and m_!_ke sure that the
programmed recording light is back on.
If you have a Mitsubishi TV with both Active ._/V Network and
"StarSight" features, you don't have to set the time on your VCR.
See your TV Owner's Guide for details.
32