Table of Contents
Advertisement
Connectinga TV with audio and video inputs
Because
you purchased
a tti-Fi VCR, you will want to take
advantage
of its superior
sound capability
and connect
:it to a
stereo TV system
with audio and video int:uts.
Before you begin this section:
• You should have already
completed
the section "Connecting
a regular
TV to the VCR."
_Important:
connecting a stereoTV withaudioandvideoinputs
0
Connect
a set of red an d white audio cables to the AUDIO
OUTPUT
terminals
on the VCR labeh!d AUDIO OUT. The
red cable is for connecting
the right (R) channel
and the white
cable is for connecting
the left (L) channel.
If your 3.Whas
only one (mono) audio input, connect: only the white (L)
output
from your VCR
If you are connecting
your VCR to a mono (non-stereo)TV,
you
cannot take advantage
of your VCR's Hi-Fi sound.
O
Connect
the other ends of this cable to the AUDIO INPUT
terminals
on your TV labeled AUDIO I[N.
O
Connect
a single yellow video cable 1;othe VIDEO OUTPUT
terminal
labeled
VIDEO OUT on the VCR, or connect
a single
S-Video cable to the S-VIDEO
OUT te::minal
on the VCR.
O
Connect
the other end of the video cable to the yellow VIDEO
INPUT
terminal
on the TV labeled VIDEO IN, or connect the
other end of the S-Video cable to the S-VIDEO
IN terminal
on
the TV.
BACK PANEL(VCR)
BACK PANEL (TV)
I
I
AUDIO OUT R-_
AUDIO OUT L
VIDEO OUT
S-VIDEO OUT
3
•
AUDIO IN
VIDEO IN
S-VlDE'O IN
1
j4
S-VIDEO IN--
/L
The plugs on the S-Video cable contain pins that
need to be aligned properly before tl-e plugs can
J
be pushed into the terminals.
17
Advertisement
Table of Contents
