Table of Contents
Advertisement
Projector mounting
Projector mount the RAC 104 using the optional PMK 100 pole
mount kit (part #70-217-01) as follows:
1.
Remove rubber feet if they were previously installed on
the bottom of the RAC 104.
2.
Attach the projector mounting brackets to the RAC 104
with the machine screws provided.
3.
Secure the RAC 104 to a projector mount or other surface
by inserting the mounting bolt through the bracket's
slotted hole, as shown below.
Mounting the RAC 104 on a projector mount
RAC 104 • Installation and Operation
Projector
Mounting
Bracket
Mounting
Bolt
Digital Projector
2-5
Advertisement
Table of Contents
