Table of Contents
Advertisement
Remote Control, cont'd
Using the help system
For information about program features, you can access the
help program in any of the following ways:
•
From the Extron Electronics program group, double-click
the Audio Products Help icon.
•
From within the Audio Products Control program, click
Help on the task bar.
•
From within the Audio Products Control program, press
the F1 key.
Updating the firmware
Firmware updates will periodically become available on the
Extron Web site. To load a firmware update:
1.
Download the update file from the Extron Web site
(www.extron.com).
2.
Run the Audio Products Control Program.
3.
On the File menu, click Update Firmware. The Firmware
Loader window appears.
Firmware Loader window
4.
Click the Upload Firmware File button.
5.
Locate and select the update file you downloaded from the
Web site and click Open. The Firmware Loader loads the
update.
The RAC 104's front panel LEDs flash intermittently
during the loading process. Once loading is complete, all
the LEDs flash simultaneously for 10 seconds and then
return to their default settings.
6.
After the update has completed loading, click Exit.
3-12
RAC 104 • Remote Control
The firmware update file must have an .s19 extension. If
it does not have that extension it will not work properly.
Advertisement
Table of Contents
