1. Lower Oven Display
2. Lower Oven Start and Cancel
3. Number Pads
4. Control Lock
5. Upper Oven Display
8. Lower Oven Selectors
9. Convection Temperature Conversion
10. Timed Cooking
11. Convect Full Meal
12. Lower Oven Light
13. Upper Oven Control
(see separate Use and Care Guide)
When power is first supplied to the appliance, everything on the
display(s) will light up for 5 seconds. Then, "PF id = 27" or
"PF id = 30" will appear. Press LOWER OVEN CANCEL, UPPER
OVEN CANCEL or CANCEL OFF to clear display(s).
Any other time "PF id = 27" or "PF id = 30" appears, a power
failure occurred. Press LOWER OVEN CANCEL, UPPER OVEN
CANCEL or CANCEL OFF and reset the clock if needed.
Lower Oven Display (combination
When the lower oven is in use, this display shows the lower oven
heat source(s) and start time.
During lower oven Timed Cooking, this display also shows a
vertical bar and minute time countdown
and the stop time (if
If "Err" appears on the display, an invalid pad was pressed.
Press LOWER OVEN CANCEL or UPPER OVEN CANCEL and
retry your entry.
When the lower oven is not in use, this display is blank.
Upper Oven Display (combination
Display (single oven models)
When the upper oven or single oven is in use, this display shows
the upper oven or single oven heat source(s), cooking power,
quantities, weights and/or help prompts.
If "RETRY" flashes on the display for one second, an invalid pad
was pressed. Retry your entry.
When the upper oven or single oven is not in use, this display
shows the time of day or Timer countdown.
The START pad begins any lower oven function except the Timer.
If not pressed within 5 seconds after pressing a pad, "START?"
will appear on the lower oven display as a reminder. If not
pressed within 5 minutes after pressing a pad, the oven display
will return to inactive mode (blank) and the programmed
will be cancelled.
The LOWER OVEN CANCEL pad stops any lower oven function
except for the Clock, Timer and Control Lock.
The cooling fan may continue to operate even after LOWER
OVEN CANCEL is pressed depending on the oven temperature.
This is a 12 hour clock and does not show a.m. or p.m.
Before setting, make sure the ovens, Timer and Timed Cooking
1. Press CLOCK SET • START.
2. Press the number pads to set the time of day.
3. Press CLOCK SET • START, START or EASY MINUTE START.
To remove the time of day from the display:
Press and hold
CLOCK SET • START for 5 seconds.
To return the time of day to the display:
Press CLOCK SET •
START. The time should not have to be reset.