When power is first supplied to the oven, the clock will be
flashing the message "clock-enter time." Time can be entered by
touching either CLOCK SET/START or START to allow operation.
To allow operation without setting a time, touch
CLOCK SET/START, START or OFF.
When the oven(s) are in use, this display shows the oven
temperature, heat source(s) and start time. On double oven
models, this display will also show which oven is being set. The
upper cavity symbol represents the upper oven; the lower cavity
symbol represents the lower oven.
In addition, during Timed Cooking, this display shows a time
countdown and the stop time (if entered).
If "Err" appears on the oven display, an error condition has
occurred. Call for service, see the "Assistance or Service"
Time of Day, Timer Display
When the oven(s) are not in use this display shows the time of
day or Timer countdown.
The START key begins all oven functions except Sabbath Mode.
If the Start key is not touched within 5 seconds after touching
another key, "START?" will appear on the oven display as a
reminder. If the Start key is not touched within 5 minutes after
touching another key, the oven display will return to inactive
mode and the programmed function will be canceled.
Lower Oven Off, Upper Oven Off and Off
The LOWER OVEN OFF, UPPER OVEN OFF and OFF keys stop
their respective oven functions except for the Clock, Timer, and
Control Lock. The oven cooling fan may continue to operate even
after an oven function has been canceled or completed,
depending on the oven temperature.
This is a 12-hour clock. Before setting, make sure the oven(s),
Timer and Timed Cooking are off.
1. Touch CLOCK SET/START.
2. Touch the number keys to set the time of day.
3. Touch CLOCK SET/START again.
Tones are audible signals, indicating the following:
Valid key touch
Oven is preheated
Function has been entered
Preheat cycle has been completed
Invalid key touch
End of a cooking cycle
When timer reaches zero
Includes using the Timer for functions other than cooking.
The volume is preset at high, but can be changed to low.
To Change: Touch OPTIONS and then "3" to toggle volume
between high and low settings.
All tones are preset on, but can be turned off.
To Turn Off/On: Touch OPTIONS and then "2" to toggle tones
between on/off settings.
End-of-Cycle and Reminder Tones
The Timed Cooking end-of-cycle and reminder tones are preset
on, but can be turned off. If all tones have been turned off, the
end-of-cycle and reminder tones cannot be independently turned
To Turn Tones Off/On: Touch OPTIONS and then "4" to turn On.
Touch OPTIONS and then "4" to turn Off.
Fahrenheit and Celsius
The temperature is preset in Fahrenheit, however it can be
changed to Celsius.
To Change: Touch OPTIONS and then "1" to toggle temperature
between Fahrenheit and Celsius settings.
When in Fahrenheit, "°F" follows the oven temperature.
When in Celsius, "°C" follows the oven temperature.
The OPTIONS selection key allows you access to 7 hidden
functions within the Electronic Oven Control. These hidden
functions allow you to change the oven temperature between
Fahrenheit and Celsius, turn the audible signals and prompts on
and off and adjust the oven calibration. The Sabbath Mode is
also set using the OPTIONS selection key.
To Use: Touch OPTIONS. The oven display will scroll through the
various options, starting at 1 and ending automatically at 7. You
can also touch the Options key repeatedly to manually scroll
through the list of options.
Fahrenheit and Celsius conversion
End beep On/Off
Oven temperature calibration
*On convection models
**Sabbath Mode must be enabled