Using Your Oven; Control Panel; Display; Glass-Touch Menu Driven Display - KitchenAid KDRU767VSS Use And Care Manual

USING YOUR OVEN

CONTROL PANEL

The control panel houses the control menu and function
controls. The control pads are very sensitive and require
only a light touch to activate.
For more information about the individual controls, see their
respective sections in this manual.

DISPLAY

When power is first
■
supplied to the
appliance, or when
power has been
interrupted for more
than 10 seconds,
the clock will be set
to 12:00 P.M. To set
the time, follow the
instructions under
"Clock" section. To bypass setting the clock and begin using
the oven, touch START, OFF or CLEAR.
On 48" (121.9 cm) ranges, the left display shows the
■
18" (45.7 cm) oven and the right display shows the
30" (76.2 cm) oven.
When the oven (s) are
■
in use (active mode),
the display shows
oven temperature,
heat source(s), and
timer, if set.
After approximately
■
2 minutes of inactivity,
the display will go into
standby (sleep) mode. When the oven is in operation, the
display will remain active.
On 30" (76.2 cm) and 36" (91.4 cm) ranges, if the range is
■
not in use (sleep mode), the display shows the time of the
day. To turn the clock display on/off, see "Clock" section.
On 48" (121.9 cm) ranges, if the range is not in use (sleep
■
mode) the right display shows the time of day. To turn the
clock display on/off, see "Clock" section.
During programming,
■
the display shows
menus and the
appropriate selections
for the respective
cooking function.
10
PM
Touch screen to begin
BAKE
Temp
Cook
350°
Time
Probe:
Enter temperature 170° - 500°F
< Back
BAKE
Cook Time
Temp
2:30
Probe:
HR MIN
Enter cooktime
< Back
GLASS-TOUCH MENU-DRIVEN
DISPLAY
The display area functions as both a display and an interactive,
menu-driven touch control. It is designed to be easily navigable,
guiding you through the menus, offering multiple selections,
accepting your input, and executing your commands. It also
provides instructions, tips, and graphics.
The LCD touch screen is used to make menu selections, adjust
settings, and input commands.
Menu selections and input adjustments are made in the center
portion of the screen, and the command inputs (OK, Adjust
Settings, Browning, Back, etc.) are made in the bottom portion
of the screen. Screen titles and descriptions are displayed in
the top portion of the screen, which accepts no input. A light-
Off
to medium-pressure touch of the fingertip will activate the menu
selection.
Off

TIMER

The Timer is set in hours and minutes and counts down the set
time. Times of more than 1 hour will count down by the minute.
In the last hour, the time will count down by minute and second.
NOTE: The Timer does not start or stop the oven.
1.
Keep Warm
350°
Touch TIMER SET.
Off
2.
TIMER
+
Time
00:00
-
HR
Use + and - buttons or number pad to enter time
< Back
Enter desired time using +
(plus) or - (minus) keys to
adjust time or numerical
keys to enter desired time.
A
B
C
3.
TIMER
+
00:00
-
HR
Use + and - buttons or number pad to enter time
< Back
Touch START TIMER to
begin countdown. When
time reaches 0:00, 4 chimes
will sound until TIMER OFF
is touched.
4.
+
-
Keep Warm
MIN
Start
Timer
To cancel Timer or stop
reminder tones, touch
TIMER OFF.
Time +
-
MIN
Start
Timer