Sewing Mode - Overview - Pfaff creative vision Owner's Manual
Hide thumbs
Also See for creative vision:
- Owner's manual (21 pages) ,
- Mode settings manual (19 pages) ,
- Brochure (12 pages)
Table of Contents
Advertisement
Sewing mode
In sewing mode view you can select stitches, adjust and sew them. You can also go to Stitch Creator and
to sequencing to create your own stitches and sequences. Your selected stitch will be shown in full scale in
the stitch fi eld. The recommendations and machine settings will be shown at the top.
Sewing mode - overview
1.
Sewing recommendations
2.
Machine settings
3.
Stitch selection area
4.
Scroll bar (Scroll through stitch
categories)
5.
Selected stitch number
6.
Stitch fi eld
7.
Mirroring side to side
8.
Mirroring end to end
9.
Sequence start position
10. Zoom to all
11. Stitch width
12. Width/position toggle
13. Stitch length
14. Stitch density
15. Needle thread tension
16. Save options
a) Save personal default stitch
b) Save to Personal menu
c) Save to Personal fi le
17. Tie-off options
a) Tie-off beginning
b) Tie-off end
c) Thread snips
18. Speed control
19. Sewing programs
20. Balance
21. Repeat buttonhole
22. Stitch positioning
23. Buttonhole slit length
24. Button stitch repetition
Note: All symbols and options will not be
shown at the same time.
4:2
1
2
5
6
9
7
8
21
3
10
16a 16b 16c
17a
17b 17c
11
13
14
15
12
22
23
24
4
16
17
18
19
20
- Quick Links:
- Threading the Machine
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the creative vision and is the answer not in the manual?
Questions and answers
when i thread the machine to pick up the bobbin thread it becomes stuck. it picks up the thread but i cant pull it through to the top, it becomes stuck
The Pfaff Vision sewing machine could get stuck when picking up the bobbin thread due to several reasons:
- Incorrect threading: The machine may not be threaded properly according to the instruction manual.
- Lint or dirt buildup: Dirt around the tension unit, especially in the discs, can cause issues.
- Damaged or wrong needle: A bent or incorrect needle can interfere with thread pickup.
- Incorrect bobbin threading or housing: The bobbin might not be threaded or placed correctly.
- Tension problems: Incorrect top thread or bobbin tension settings can cause jamming.
- Different threads: Using different threads for the top and bobbin can lead to looping and jams.
- Stitch length settings: An inappropriate stitch length for the fabric type may cause problems.
Checking and correcting these areas can help resolve the issue.
This answer is automatically generated