Pfaff creative vision Owner's Manual page 101

Automatic stitch building - example
1. In embroidery mode, go to sequencing and
then open the selection menu. Select the
decorative stitch 4.5.21.
2. Duplicate the stitch and mirror the copy side to
side. Close sequencing to load to embroidery
edit. Set hoop size to 360x200.
3. Open Shaping.
4. Select the line shape in the list (A).
5. Select the touch function - rotate. Touch the
wheel center icon once to turn 90 degrees.
6. Add two copies by touching the duplicate last
(+) icon (C).
7. Open the select spacing pop-up (E) and select
left justifi cation. This will place the objects
close together. Close the pop-up.
8. Select the touch function - scale. Adjust the
length of the sequence to 240mm.
9. Close Shaping. Switch to embroidery stitch-out
by touching the embroidery toggle icon. Start
to embroider.
A
C
E
8:15