Sewing; Sewing Mode - Overview; Select A Stitch; Stitch Adjustments - Pfaff ambition essential Owner's Manual

Sewing

When the machine is turned on it is set to direct selection mode. Straight stitch is selected by default.

Sewing mode - overview

1. Selected stitch number
2. Presser foot recommendation
3.

Stitch length

4. Stitch width/stitch positioning
5. Needle position
6. Needle stop position
Note: If the presser foot recommendation shows +, an
optional presser foot is required for the selected stitch.
See stitch table on page 9 for details about the sewing
techniques stitches.

Select a stitch

When the machine is set to direct selection mode
the utility stitches 0 to 9 are selected simply by
pressing the corresponding stitch selection button.
When the machine is set to pattern or alphabet
mode press a combination of the stitch selection
buttons to select a stitch or letter.

Stitch adjustments

Your machine will automatically set the length and
width/positioning for the selected stitch. You can
make your own adjustments on the selected stitch.
The setting changes only affect the selected
stitch, and will be reset to default when another
stitch is selected. The changed settings are not
automatically saved when turning your machine
off.
The set stitch width and stitch length are shown
next to the icons for each adjustment. When
trying to exceed minimum or maximum settings a
warning sound will be heard.
Note: The default value of a setting will fl ash on the
display when scrolling through the setting values.
Stitch length (3)
Use "+" and "-" to increase or decrease the stitch
length.
22
6
1
Direct
2
Direct
5
3 4
3 3